로고

배터리 충전상태 및 건강상태 측정

1. Channels information : 2Channel

2. Power grid side parameters
가. Input power :　AC380 +-10% 50/60 +-5Hz　
나. Power factor : >= 99% (Full load)　
다. THDi :<=5%(Full load)
라. Input resistance : >=1M Ohm
마. Input power : 111.1KW
바. Input current : 168.8A/single
사. Overall system efficiency(Max) : 94%
아. Noise : <=75dB

3. Functions and performances
가. Voltage Output range
1) Charge : 0V～380V
2) Discharge : 10V～380V
3) Min discharge voltage : 10V
4) Accuracy : +-0.02% of FS
5) Resolution : 24bit
나. Current
1) Output range 1A～100A
2) Accuracy(independent range) : +-0.05% of FS
3) CV cut-off current : 200mA
4) Resolution : 24bit
다. Power
1) Single channel output power : 100KW
2) Whole machine output power : 200KW
라. Time
1) Current response time : <=5ms
2) Current conversion time : <=10ms
3) Min. step time : 0.1s
마. Charge/Discharge modes
1) Charge/Discharge modes : CCC, CVC, CC-CVC, CPC, CCD, CVD, CPD, CRD
2) Cut-off condition : Voltage, Current, ΔTime, Capacity, -ΔV
바. Simulation
1) Charge : Current, Power
2) Discharge : Current, Power
3) Switch : Support continuous switching between charge and discharge
4) Cut-off condition : Time, step line
5) Steps file lines : 1,000,000
사. Pulse Mode
1) Charge : Current power
2) Discharge : Current, Power
3) Min pulse : 100ms
4) Pulse counts : Up to 32
5) Charge and discharge switch : supported
6) Cut-off condition : Voltage, ΔTime
아. DCIR : DCIR by calculation